Teaching myself aerobatics: Don’t try this at home!


Check out their line of headsets, camera cables, and LED lighting today!
CRAZEDpilotLogoSmall


Bucker Jungster I and me

Teaching myself aerobatics: Don’t try this at home!
Disclaimer: this post is for entertainment only. I do not recommend anyone using the concepts or techniques employed here by the author.

Dateline 1992. I was a starving flight instructor flogging my way to a logbook full of flight time in hopes of moving on to the “big iron” some day.

Since my original goal to be a G-pulling fighter pilot was derailed by bad eyesight, I had settled on flying buses to pay the bills and flying aerobatics on weekends.
It was a reasonable goal, but my impatience got the best of me – I wanted to do aerobatics now and I didn’t have access to an acro mount.

So on a shoe-string budget I sourced an old plans-built biplane that was fully aerobatic. You can read about my Bücker Jungster I here.

Now that I had the proper airplane, there was another small wrinkle, it was a single place so there was no place to put an aerobatic instructor.
The smart thing to do at this point would have been to go take a 10 hour aerobatic course up in Oklahoma City or down in Dallas, but I was never accused of being smart.

So it was that I carefully taught myself aerobatics.

Very carefully. Luckily there was a lot of information out there on spins due to some recently spin-related crashes in Pitts Specials. Since my airplane was similar to a Pitts I heeded the warnings and rehearsed the recovery techniques in my sleep (Beggs-Muller method).
I also consumed every instruction manual I could get ahold of. I would go out for short flights and often only work on one maneuver at a time.
Once I felt like I had the hang of a particular figure, I would string my known repertoire together.

 

The airplane was not set up for sustained inverted flight and being mindful of its age, it was built in 1970 out of wood, I limited the Gs to 5 and didn’t do any gyroscopics beyond single snap rolls.

Things I did that kept me from getting hurt:

  • Slow and methodical pace
  • Relentless study. Often reading the same thing in multiple books just to get extra perspective
  • Very conservative. No risk taking, beyond what I was already doing by teaching myself
  • New maneuvers were not tried unless it was studied, planned, and thoroughly practiced in my mind
  • No acro below 3000′

In the end I never saw the killer flat inverted spin or suffered a catastrophic structural failure.

I did learn that you can stall going straight down at full power, pulling Gs can be exhausting, and I roll better to the left than to the right (the later is still true).

bucker_jungster1

In the end, I would have progressed so much faster and easier if I would have bitten-the-bullet and took a course. Is that why they say, youth is wasted on the young?

DON’T TEACH YOURSELF AEROBATICS, but if you are interested in learning more, here is a list of books that I would recommend:

Fly for Fun with Bill Thomas
FLY FOR FUN TO WIN
Conquest of lines and symmetry
Roll Around a Point: Aerobatics
The Basic Aerobatic Manual (The Flight Manuals Series)
Aerobatics
Skydancing: Aerobatic Flight Techniques (ASA Training Manuals)

by Brent


VISIT OUR SPONSOR for Training DVD's, affordable headsets, cable adapters, headset parts, LED strobes and lights, and more! They cover ALL EXPENSES for iFLYblog.com to keep it coming FREE to you FOREVER!

CRAZEDpilotLogoSmall


 

Subscribe to the iFlyBLOG Mailing List to get the latest blog posts and news to your E-Mail instantly! PLUS TWO FREE eBooks!

learning to fly

 

Share it